Tri Clamp

[protto]

Tenker på å utvide produksjonen og lurer på dette ifm bygging av nytt utstyr:

Kva er den faktiske diameteren på ein 1,5" tri clamp? Er den 1,5"? Nokon som har som kan måle? Eventuelt også 2" eller 2,5".
Er Tri clamp og clover det samme?

[Livar]

A TriClamp connection consists of two Ferrules joined by a Clamp with a Gasket.

Additional info about valves and fittings
 

How to Determine TriClamp Size
TriClamp Size is determined by the outside diameter of the pipe, NOT the outside diameter of the ferrule. The ferrule ( the end piece that makes half of the connection to another TC fitting) is about 1/2" larger than the TC size. In other words, a 1.5" TC fitting will have a ferrule whose outside diameter is about 2". Confusion arises with 1" TC fittings because they use the same ferrule as 1.5" TC fittings. [The two ferrules at right in photo are 1.5" and 1" Triclamp.]
 
TriClamp Ferrule O.D."B" in photo above Pipe I.D.
"A" in photo above
1" 1.984" 0.87"
1.5" 1.984" 1.37"
2" 2.516" 1.87"
2.5" 3.047" 2.37"
3" 3.579" 2.87"
4" 4.682" 3.834"
6" 6.570" 5.782"
8" 8.570" 7.782"
1" and 1.5" TriClamp use the same clamp. The 'ferrule' is the same. The difference is the pipe diameter. To demonstrate, a 1" Tee is attached directly to a 1.5" Tee.  1" TC Gasket on top and 1.5" TC Gasket below. They have the same outside diameter. The difference is the throughput.
 

[protto]

Genialt, thanks!

[Livar]

Her er adressen jeg fant informasjonen på

http://www.stpats.com/index.htm